![]() |
|||||
|
|||||
Importance of Proper Blackout Housing |
|||||
|
|||||
Complicating all of the above is the fact that pullets within a house are not identical in their response to light. This becomes evident with the variation seen performing uniformity checks during pullet weighing. The variation is simply part of the biology of living things. Thus, it is probably safe to say that all birds will not respond to exactly the same threshold level of light. It is important that sufficient minimal light intensity be provided such that all birds perceive the minimal threshold of light. The use of blackout pullet houses is a common industry practice. The purpose of blackout housing is to sensitize (to make more responsive) the pullet's brain such that when the pullet is exposed to long daylengths in the breeder house, she will respond with efficient egg production. If the pullet is not exposed to the short daylengths prior to initiation of egg production, she will become refractory (become less responsive to the exposure of long daylengths) to light and will not properly respond to the long daylength in the breeder house. Good light management has the effect of initiating the final elements of sexual maturity for efficient egg production. The properly sensitized bird will come into production on time which is essential to managing breeder flock placement times. Black-out housing is achieved by exposing the growing pullets to 8 hours of light per day using either artificial or natural light. When using natural light for the short photo-period, the curtains are raised or lowered to provide the light and dark periods. When using artificial light, the curtains are either raised permanently or the sidewalls are solid. Natural light systems in blackout housing have been used since the early 1980's but interest in artificial lighting has gained recently. One by-product of a good black out program is better control of growth and feed consumption. How can problems develop?Leaks of light coming into the house during the dark period reduce the contrast between light and dark that the birds are exposed to. This will decrease the effectiveness of blackout housing. It is a continuous job to minimize light leaks and maintain optimal blackout conditions. Going into the house during the dark phase is essential to check the completeness of blackout conditions. The best way to check blackout conditions is to turn the lights off or raise the curtain during the time which the birds are normally exposed to light. One should not go inside the house to service birds during the dark period. Turning on lights, even briefly, especially during the last 8 weeks in the pullet house can cause the pullet to misinterpret daylength. Fixing a feeder or picking up mortality is not to occur except during the period of light. If artificial light is being used in the pullet house, dirty lamps or any factor which decreases the desired light intensity in the house can create a problem. Also, when replacing burned out incandescent lamps, it is important to use lamps with the same wattage and voltage so as not to change light intensity. Consistent management and attention to detail is essential to proper blackout rearing. Prepared by
|
|||||
Last Modified:
May 29, 2007
|